Nano-Rework Station

Product Catalog

Product Sheet (PDF)

Product Video

MS6000 is rework system for chip parts only, it can be rework from 0402 (EIA 01005) chip and densely board with the original Tweezers Head. The solder cleaner and dispenser is also equipped by optional.

  • Fast heating and cooling by the halogen NIR Top heater
  • High magnification CCD camera
  • Narrow gap rework is possible by original tweezers
  • 2 zones profile control system
Board Size: 50x50-100x150mm Thickness: 0.5-1.0mm Weight: 0.5kg max.
Component Chip Parts. Size: 0402(EIA 01005), 0603(EIA 0201), or larger


1. Power Cable (3 cores) x 1 (approx. 5M)
2. Air Tube x 1 (6mmD approx. 3M)
3. Under board support pins system x 1
4. Tweezers(for 0603/0402 Chip Parts) x 1
5. Board Support Jig x 4


1. Tweezers Head (for required size)
2. Center Vacuum Bit for Nozzle 
3. NVD2400 Cleaning & Despenser (for Tip parts Land) 
4. Solder Paste with 5cc syringe (for Tip Parts Land) 
5. MS6000-FDR 8mm Tape Feeder (for Tip Parts)


Item Specifications
Board size 50x50---100x150mm
Thickness 0.5--1.5mm
Weight 0.5Kg max.
Top Space up to 10mm max.
Bottom Space up to 10mm max.
XY Table Fine Adjust +&- 5.0mm max.
Moving Range Free with Air lock
Board Holder Z Slot or Holder Jig
Board Support Under side 4 pins by 2 rails
Nozzle Tweezers from 0402(EIA 01005)
Tip Parts Feeder Palette and Tape
Adjustable Angle within plus minus 5 degree
Vision System CCD Camera
Magnification 20--72 Zooming
Focus Auto/Manual selectable
Monitor 14inch LCD
Heater System Top by Halogen IR 100W
Bottom by Hot Air 400W 8x8mm
Controller Touched Panel System
Control System PID control
Manual Mode 2 zoon
Data Setting Top: Level 0-12
Bottom: 0--500 degree
Time Range Heating: 000----999 sec.
Cooling: 000----999 sec. (Manual/Auto)
Dispenser 5cc+0.25mm needle(option)
Solder Cleaner Vacuum (option)
Power 220-240V AC 2 phase 1.0KVA
Air 0.5Mpa
Dimension 470Wx650Dx520Hmm
Weight 20Kg approximate.

Need a Sales Representative?

Contact Us